Setting a Wait Time for Connecting to a Network
When a network is designed to enjoy redundant connectivity with multiple switching hubs or bridges, it must have a mechanism to prevent packets from looping. One effective solution is to define the role of each switch port. However, communication may still be disrupted for several tens of seconds immediately after you change the way that network devices are connected, or if you add a new device. If this type of problem occurs, set a wait time for connecting to the network.
1
Display the <Menu> screen.
Home ScreenTouch Panel Model
Select <Menu> in the Home screen.
5 Lines LCD Model
Press
.
2
Select <Network Settings>.
3
Select <Waiting Time for Connection at Startup>.
4
Enter the waiting time required to start a communication with the network, and press <Apply> (
).
LINKS