Starting Remote UI
To operate remotely, you need to input the IP address of the machine into a Web browser and start the Remote UI. Check the IP address set to the machine in advance (
Viewing Network Settings). If you have any questions, ask your Network Administrator.
1
Start the Web browser.
2
Enter "http://(the IP address of the machine)/" in the address field, and press the [ENTER] key.
If you want to use an IPv6 address, enclose the IPv6 address with brackets (example: http://[fe80::2e9e:fcff:fe4e:dbce]/).
If a security alert is displayed3
Log on to the Remote UI.
Select [System Manager Mode] or [General User Mode], and then enter the appropriate PIN in [Remote UI Access PIN] as necessary.
[System Manager Mode] You can perform all the Remote UI operations and settings. If a System Manager PIN is set, enter the PIN in [System Manager PIN].
Setting the System Manager PIN [General User Mode] You can check the status of documents or the machine, and you can also change some of the settings. If you wish to delete your print documents, enter the user name of the documents in [User Name]. The user name is automatically set to print documents based on information such as your computer name or computer logon name.
[Remote UI Access PIN] Enter the Remote UI Access PIN in the following cases.
Setting a Remote UI PIN When a System Manager PIN is not set, and you are logging on in System Manager Mode
When you are logging on in General User Mode
4
Click [Log In].