You can connect the device and computer with a USB cable and install the driver.
During installation, the configuration profile corresponding to the printer model is automatically set. You can change or import the configuration profile if necessary.
Installation of the optional USB interface board (if required with the device you are using)
Page description language selection (Plug & Play) function setting of the device (if required with the device you are using)
Set [PDL Selection (Plug and Play)] at the device to match the driver you are using. For details about the setting method, refer to the manual of the device.
If the device is connected to the computer you are using, under normal circumstances, set the installer so that the configuration profile is automatically selected. If the computer cannot be connected to the device and device information cannot be retrieved, or if it is necessary to customize the configuration profile, manually select the configuration profile or import an exported profile.
8
Click [Restart] or [Exit].
If device information cannot be acquired during installation, set the device information before printing. You can also change or import a configuration profile while setting the device information.
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.