Stack Bypass Alignment Tray-C2
By using the Stack Bypass Alignment Tray-C2, you can reduce the amount of skew of paper (i.e. paper is transported diagonally) which is fed from the Stack Bypass-B1, and prevent the image misalignment.
Parts and Their Functions
 CAUTION |
If the POD Deck Lite-C1 is attached, be careful not to get your hands caught in the gap between the Stack Bypass Alignment Tray-C2 and the POD Deck Lite-C1 when clearing paper jams. |
IMPORTANT |
You cannot pull out the auxiliary tray of the Stack Bypass-B1 when the Stack Bypass Alignment Tray-C2 is attached. |
NOTE |
For information on paper weight and paper size that can be used with the Stack Bypass Alignment Tray-C2, see items for the Stack Bypass-B1 in "Available Paper Stock." |
1. | Fixing Roulette Screws Tighten or loosen the screws to adjust the paper alignment guides. |
2. | Paper Alignment Guides Stabilize the position of the loaded paper. |