Saddle Stitcher Unit of the Booklet Finisher-T1

This section describes how to clear a staple jam which occurs in the saddle stitcher unit of the Booklet Finisher-T1. The location of the Booklet Finisher-T1 is indicated in the following illustration.

IMPORTANT
Make sure to close all covers and paper drawers of the machine before clearing any staple jams. Before clearing a staple jam in the saddle stitcher unit, remove all paper that has been output to the booklet tray.

NOTE
The Booklet Finisher-T1 is an optional product.* * imagePRESS C750, imagePRESS C650, imagePRESS C65

Open the front cover of the finisher.

Pull out the saddle stitcher unit.

1 Stapler Unit of the Saddle Stitcher Unit 2 Saddle Stitcher Unit	1. Grip the handle of the saddle stitcher unit, and pull out until it stops.
	2. Pull the stapler unit of the saddle stitcher unit towards you, and then push it up.

Pull out the staple case containing the jammed staples, holding it by its left and right sides.

Push up the tab on the staple case.

	1. Push down Part A to unlock.
	2. Push up Part B.

Remove any jammed staples.

	1. Remove any jammed staples.
	2. Return Part B to its original position.

CAUTION
Be careful with the staple waste as this may result in personal injury.

Return the staple case to its original position.

Push the staple case in until it clicks into place.

Gently push the saddle stitcher unit back into its original position.

	1. Pull the stapler unit towards you, and then push it down into its original position.
	2. Grip the handle of the saddle stitcher unit, and return it to its original position.

CAUTION
When returning the saddle stitcher unit to its original position, be careful not to get your fingers caught, as this may result in personal injury.

Close the front cover of the finisher.

CAUTION
When closing the cover, be careful not to get your fingers caught, as this may result in personal injury.

NOTE
When you have cleared the staple jam, be sure to manually reposition the staples in the saddle stitcher unit. (See "Saddle Stitch Staple Repositioning.")

Saddle Stitcher Unit of the Booklet Finisher-T1

1. Grip the handle of the saddle stitcher unit, and pull out until it stops.

2. Pull the stapler unit of the saddle stitcher unit towards you, and then push it up.

1. Push down Part A to unlock.

2. Push up Part B.

1. Remove any jammed staples.

2. Return Part B to its original position.

1. Pull the stapler unit towards you, and then push it down into its original position.

2. Grip the handle of the saddle stitcher unit, and return it to its original position.