External 2/3 Hole Puncher-C1 (Optional)
This section describes how to clear a paper jam which occurs in the External 2/3 Hole Puncher-C1. The location of the External 2/3 Hole Puncher-C1 is indicated in the following illustration.
NOTE |
The External 2/3 Hole Puncher-C1 is an optional product.* * imagePRESS C750, imagePRESS C650, imagePRESS C65 |
1.
Open the front cover of the puncher waste tray.
2.
Set the green knob to the fixed position.
3.
Remove any paper jammed from the top cover of the puncher.
4.
Close the top cover of the puncher.
 CAUTION |
When closing the cover, be careful not to get your fingers caught, as this may result in personal injury. |
5.
Close the front cover of the puncher waste tray.
| CAUTION |
When closing the cover, be careful not to get your fingers caught, as this may result in personal injury. |
6.
Follow the instructions on the screen.
NOTE |
The screen indicating the directions on how to clear the paper jam is displayed repeatedly until the paper jam is cleared. |