NOTE |
Table descriptionBold values in the table indicate the default settings. After changing the setting items with "*1", cycle the power of the printer or perform a hard reset to make the settings effective. The setting items or setting values with "*2" may not be displayed depending on your printer model or the availability of the optional accessories and other settings. |
Setting Item | Setting Value | Setting |
[Interface Selection]*1 | [USB]: [Off], [On] [Network]: [Off], [On] [USB Storage Device]*2: [MEAP Driver]*2: [Off], [On] | Specifies the settings for the interfaces used for communication with the computer and so on. You can specify [On] or [Off] for each interface. |
[Timeout] | [Timeout]: [Off], [On] [Timeout Time]*2: 5 to 15 to 300 seconds | Specifies the function to finish a job automatically. |
[Connection Recog.]*1 | [Off], [On] | When you print using the standard network, you may not obtain proper printout results. (Unreadable characters are printed, overlay printing fails, etc.) In this case, specify [Off] for this item. |
[Extended RX Buffer]*1*2 | [Off], [On] | If this item is set to [On], the memory capacity of the printer's receive buffer that receives the data is increased. You can speed up the time the computer exits when you send a large amount of data or complicated data from the computer. |