Available Paper Stock

The paper types that can be used with this machine are shown in the following table. Icons indicating the type of paper loaded in each paper drawer can be displayed on the paper selection screen if you store that information in the machine beforehand. (See "Registering the Paper Size and Type for a Paper Source.")
IMPORTANT
For high-quality copies and printouts, use paper that is recommended for this machine. Using other types of paper may cause problems such as paper jams.
If you use the type of paper that is not recommended for this machine, contact your local authorized Canon dealer.
You can use various types of paper for this machine, however, you may not be able to get the sufficient image quality and paper feeding depending on the paper characteristics (stiffness, thickness, air permeability, smoothness, moisture absorbency, etc.). For the paper thickness, please use plain paper whose thickness is 360 micrometer or less as a reference.
: Available -: Unavailable
Paper Type
Paper Source
Paper Drawer
Stack Bypass-C
POD Deck Lite-C
POD Deck Lite XL-A
Multi-drawer Paper Deck-C
Document Insertion Unit-N
Thin 2
(14 lb bond to 16 lb bond (52 g/m2 to 63 g/m2))
*6
Thin 1
(17 lb bond to 20 lb bond (64 g/m2 to 79 g/m2))
Plain 1
(20 lb bond to 24 lb bond (80 g/m2 to 90 g/m2))
Plain 2
(25 lb bond to 28 lb bond (91 g/m2 to 105 g/m2))
Recycled 1
(17 lb bond to 20 lb bond (64 g/m2 to 79 g/m2))
Recycled 2
(20 lb bond to 24 lb bond (80 g/m2 to 90 g/m2))
Recycled 3
(25 lb bond to 28 lb bond (91 g/m2 to 105 g/m2))
Color 1
(17 lb bond to 20 lb bond (64 g/m2 to 79 g/m2))
Color 2
(20 lb bond to 24 lb bond (80 g/m2 to 90 g/m2))
Heavy 1
(29 lb bond to 34 lb bond (106 g/m2 to 128 g/m2))
Heavy 2
(35 lb bond to 40 lb bond (129 g/m2 to 150 g/m2))
Heavy 3
(40 lb bond to 66 lb cover (151 g/m2 to 180 g/m2))
Heavy 4
(67 lb cover to 80 lb cover (181 g/m2 to 220 g/m2))
Heavy 5
(82 lb cover to 140 lb index (221 g/m2 to 256 g/m2))
Heavy 6
(140 lb index to 110 lb cover (257 g/m2 to 300 g/m2))
Heavy 7
(111.3 lb cover to 120.2 lb cover (301 g/m2 to 325 g/m2))
-
*7
-
Heavy 8
(120.6 lb cover to 129.4 lb cover (326 g/m2 to 350 g/m2))
-
*7
-
1-Sided Coated Thin 2
(22.6 lb bond to 23.9 lb bond (85 g/m2 to 90 g/m2))
-
*8,*9,*10
*8,*9,*10
*8
1-Sided Coated Thin 1
(24.2 lb bond to 27.9 lb bond (91 g/m2 to 105 g/m2))
-
*8,*11
*8,*11
*8
1-Sided Coated 1
(29 lb bond to 34 lb bond (106 g/m2 to 128 g/m2))
-
1-Sided Coated 2
(34 lb bond to 40 lb bond (129 g/m2 to 150 g/m2))
-
1-Sided Coated 3
(40 lb bond to 66 lb cover (151 g/m2 to 180 g/m2))
-
1-Sided Coated 4
(67 lb cover to 80 lb cover (181 g/m2 to 220 g/m2))
-
1-Sided Coated 5
(82 lb cover to 140 lb index (221 g/m2 to 256 g/m2))
-
1-Sided Coated 6
(140 lb index to 110 lb cover (257 g/m2 to 300 g/m2))
-
1-Sided Coated 7
(111.3 lb cover to 120.2 lb cover (301 g/m2 to 325 g/m2))
-
*7
-
1-Sided Coated 8
(120.6 lb cover to 129.4 lb cover (326 g/m2 to 350 g/m2))
-
*7
-
2-Sided Coated Thin 2
(22.6 lb bond to 23.9 lb bond (85 g/m2 to 90 g/m2))
-
*8,*9,*10
*8,*9,*10
*8
2-Sided Coated Thin 1
(24.2 lb bond to 27.9 lb bond (91 g/m2 to 105 g/m2))
-
*8,*11
*8,*11
*8
2-Sided Coated 1
(29 lb bond to 34 lb bond (106 g/m2 to 128 g/m2))
-
2-Sided Coated 2
(34 lb bond to 40 lb bond (129 g/m2 to 150 g/m2))
-
2-Sided Coated 3
(40 lb bond to 66 lb cover (151 g/m2 to 180 g/m2))
-
2-Sided Coated 4
(67 lb cover to 80 lb cover (181 g/m2 to 220 g/m2))
-
2-Sided Coated 5
(82 lb cover to 140 lb index (221 g/m2 to 256 g/m2))
-
2-Sided Coated 6
(140 lb index to 110 lb cover (257 g/m2 to 300 g/m2))
-
2-Sided Coated 7
(111.3 lb cover to 120.2 lb cover (301 g/m2 to 325 g/m2))
-
*7
-
2-Sided Coated 8
(120.6 lb cover to 129.4 lb cover (326 g/m2 to 350 g/m2))
-
*7
-
Matte Coated Thin 2
(22.6 lb bond to 23.9 lb bond (85 g/m2 to 90 g/m2))
-
*8
*8
*8
Matte Coated Thin 1
(24.2 lb bond to 27.9 lb bond (91 g/m2 to 105 g/m2))
-
*8
*8
*8
Matte Coated 1
(71 lb text to 85 lb text (106 g/m2 to 128 g/m2))
-
Matte Coated 2
(85 lb text to 100 lb text (129 g/m2 to 150
g/m2))
-
Matte Coated 3
(56 lb cover to 67 lb cover (151 g/m2 to 180 g/m2))
-
Matte Coated 4
(67 lb cover to 81 lb cover (181 g/m2 to 220 g/m2))
-
Matte Coated 5
(81 lb cover to 94 lb cover (221 g/m2 to 256 g/m2))
-
Matte Coated 6
(94 lb cover to 110 lb cover (257 g/m2 to 300 g/m2))
-
Matte Coated 7
(111.3 lb cover to 120.2 lb cover (301 g/m2 to 325 g/m2))
-
*7
-
Matte Coated 8
(120.6 lb cover to 129.4 lb cover (326 g/m2 to 350 g/m2))
-
*7
-
Textured 1
(20 lb bond to 24 lb bond (80 g/m2 to 90 g/m2))
-
Textured 2
(24 lb bond to 28 lb bond (91 g/m2 to 105 g/m2))
-
Textured 3
(29 lb bond to 34 lb bond (106 g/m2 to 128 g/m2))
-
Textured 4
(34 lb bond to 40 lb bond (129 g/m2 to 150 g/m2))
-
Textured 5
(40 lb bond to 66 lb cover (151 g/m2 to 180 g/m2))
-
Textured 6
(67 lb cover to 81 lb cover (181 g/m2 to 220 g/m2))
-
Textured 7
(82 lb cover to 140 lb index (221 g/m2 to 256 g/m2))
-
Textured 8
(140 lb index to 110 lb cover (257 g/m2 to 300 g/m2))
-
Vellum 1*1
(17 lb bond to 20 lb bond (64 g/m2 to 79 g/m2))
Vellum 2*1
(20 lb bond to 24 lb bond (80 g/m2 to 90 g/m2))
Vellum 3*1
(24 lb bond to 28 lb bond (91 g/m2 to 105 g/m2))
Transparency*2
(40 lb bond to 66 lb cover (151 g/m2 to 180 g/m2))
*6
-
Clear Film
 (40 lb bond to 66 lb cover (151 g/m2 to 180 g/m2))
-
Pre-Punched 1
(17 lb bond to 20 lb bond (64 g/m2 to 79 g/m2))
Pre-Punched 2
(20 lb bond to 24 lb bond (80 g/m2 to 90 g/m2))
Tab 1
(40 lb bond to 66 lb cover (151 g/m2 to 180 g/m2))
*3
*6
Tab 2
(67 lb cover to 80 lb cover (181 g/m2 to 220 g/m2))
*3
*6
Labels
(56 lb cover to 66 lb cover (151 g/m2 to 180 g/m2))
-
-
Bond 1
(17 lb bond to 20 lb bond (64 g/m2 to 79 g/m2))
Bond 2
(20 lb bond to 24 lb bond (80 g/m2 to 90 g/m2))
Bond 3
(25 lb bond to 28 lb bond (91 g/m2 to 105 g/m2))
Letterhead
(56 lb cover to 66 lb cover (151 g/m2 to 180 g/m2))
Envelope
(67 lb cover to 81 lb cover (181 g/m2 to 220 g/m2))
*4
*5
*5
-
-
*1 Some types of vellums cannot be used.
*2 Use only LTR or LTRR transparencies recommended for this machine.
*3 The Tab Feeding Attachment-F is required.
*4 The Envelope Feeder Attachment-F is required, except when using ISO-C5 or Kakugata 2.
*5 The Envelope Feeder Attachment-G is required.
*6 Long sheet cannot be used even when the Long Sheet Tray-B is attached.
*7 If you use paper types heavier than 110 lb cover (300 g/m2) on the Multi-drawer Paper Deck, the productivity may be decreased.
*8 If coated thin paper is used for printing, it may become creased depending on the latest print jobs. In that case, keep the paper deck open for about 10 minutes to lower the temperature of the paper deck, and then start printing again.
*9 Long sheet cannot be used.
*10 Basis weight less than 22 lb bond (84 g/m2) cannot be used.
*11 Long sheet less than 27 lb bond (100 g/m2) in weight cannot be used.
: Available -: Unavailable
Paper Size
Width x Length
Paper Source
Paper Drawer
Stack Bypass-C
POD Deck Lite-C
POD Deck Lite XL-A
Multi-drawer Paper Deck-C
Document Insertion Unit-N
13" x 19"
13" x 19"
12" x 18"
12" x 18"
12 5/8" x 17 11/16"
12 5/8" x 17 11/16"
11" x 17"
11" x 17"
LGL
8 1/2" x 14"
LTR
11" x 8 1/2"
LTRR
8 1/2" x 11"
STMTR
5 1/2" x 8 1/2"
-
EXEC
7 1/4" x 10 1/2"
Custom Size
3 7/8" x 5 7/8" to 13" x 19 1/4" (98.4 mm x 148 mm to 330.2 mm x 487.7 mm)
*1
*1
*2
*3
Custom Size
8 1/4" x 19 1/4" to 13" x 51 1/4" (210 mm x 487.8 mm to 330.2 mm x 1,300 mm)
-
*6
-
*7
-
-
Envelope
ISO-C5
6 3/8" x 9" (162 mm x 229 mm)
-
No. 10(COM10)
4 1/8" x 9 1/2" (104.7 mm x 241.3 mm)
-
-
Monarch
3 7/8" x 7 1/2" (98.4 mm x 190.5 mm)
-
-
DL
4 3/8" x 8 5/8" (110 mm x 220 mm)
-
-
Nagagata 3
4 3/4" x 9 1/4" (120 mm x 235 mm)
-
-
Yougatanaga 3
4 3/4" x 9 1/4" (120 mm x 235 mm)
-
-
Kakugata 2
9 1/2" x 13 1/2" (240 mm x 332 mm)
-
-
Custom Size
6"x9", 9"x12", 10"x13"
*4
*4
*5
*5
-
-
*1 Custom paper sizes can only be fed if they are between 5 1/2" x 5 7/8" to 13" x 19 1/4" (139.7 mm x 148 mm to 330.2 mm x 487.7 mm).
*2 Custom paper sizes can only be fed if they are between 5 1/2" x 7 1/8" to 13" x 19 1/4" (139.7 mm x 182 mm to 330.2 mm x 487.7 mm).
*3 Custom paper sizes can only be fed if they are between 7 1/8" x 7 1/8" to 13" x 19 1/4" (182 mm x 182 mm to 330.2 mm x 487.7 mm).
*4 Envelopes whose size is between 3 7/8" x 5 7/8" to 13" x 19 1/4" (98.4 mm x 148 mm to 330.2 mm x 487.7 mm) can also be fed, however, image may not be printed correctly on the envelopes.
*5 Envelopes whose size is between 5 1/2" x 5 7/8" to 13" x 19 1/4" (139.7 mm x 148 mm to 330.2 mm x 487.7 mm) can also be fed, however, image may not be printed correctly on the envelopes.
*6 When the Long Sheet Tray-B is attached. For one-sided printing, you can load paper sizes between 8 1/4" x 19 1/4" to 13" x 51 1/4" (210 mm x 487.8 mm to 330.2 mm x 1,300 mm). For two-sided printing, you can load paper sizes between 8 1/4" x 19 1/4" to 13" x 30" (210 mm x 487.8 mm to 330.2 mm x 762 mm).
*7 Custom paper sizes can only be fed if they are between 8 1/4" x 19 1/4" to 13" x 30" (210 mm x 487.8 mm to 330.2 mm x 762 mm).

IMPORTANT
If you are using pre-printed paper, bordered paper, or color paper, and the printed image is misaligned vertically as seen from the paper feeding direction, set to 'Off' for <Auto Adjust Left/Right Edge Alignment> in [Paper Settings] in [Preferences] (Settings/Registration). (See "Changing the Auto Adjust Left/Right Edge Alignment.")
Use paper soon after it is unpacked as the moisture absorption condition of paper may affect the image quality and paper feeding. Wrap any remaining paper in its original package and store it on a flat surface.
When the High Capacity Stacker is attached, the minimum paper size that can be fed in the machine is 5 1/2" x 7 1/8" (140 x 182 mm) (including the envelopes). Also, the envelopes cannot be stacked on the High Capacity Stacker.
NOTE
For instructions on loading paper, see the following sections:
"Loading Paper into the Stack Bypass-C" for the Stack Bypass-C
The Stack Bypass-C, POD Deck Lite-C, Multi-drawer Paper Deck-C, and Document Insertion Unit-N are optional.
Chlorine-free paper can be used with this machine.
The printed envelopes may be creased depending on how envelope is pasted together or the position of the flap.

Storing Printouts

When handling or storing paper printed by this machine, be careful of the following points.

How to store printouts

Store paper on a flat surface.
Avoid storing printouts in folders made of PVC material, as this may cause the toner to melt and stick to the PVC material. Toner may peel when printouts are folded or creased.
Store printouts in the condition where they are not folded or creased as toner may peel.
Put printouts in a binder when storing for a long period of time (two years or longer).
Printouts may discolor when stored for a long period of time.
Avoid storing printouts in a location subject to high temperatures.

Precautions when sticking printouts with adhesive

Be sure to use insoluble adhesive.
Test the adhesive on an unneeded printout before using.
Before stacking printouts that stuck with adhesive, check that the adhesive completely dried.
3U18-01J