Saddle Stitcher Unit of the Booklet Finisher-AC

This section describes how to clear a paper jam which occurs in the saddle stitcher unit of the Booklet Finisher-AC. The location of the Booklet Finisher-AC is indicated in the following illustration.
1.
Open the front cover of the finisher.
2.
Turn the knob at the top of the saddle stitcher unit about 10 times.
3.
Pull out the saddle stitcher unit.
4.
Check whether paper is jammed.
1.Open the transparent guide.
2.If paper is jammed, gently pull it out in the direction of the arrow.
3.Close the transparent guide.
5.
Gently push the saddle stitcher unit back into its original position.
6.
Close the front cover of the finisher.
CAUTION
When closing the cover, be careful not to get your fingers caught, as this may result in personal injury.
7.
Follow the instructions on the screen.
NOTE
The screen indicating the directions on how to clear the paper jam is displayed repeatedly until the paper jam is cleared.
3U18-0U2