Adjusting the Paper Separation Fan Level

You can adjust the paper separation fan level of the custom paper type. This setting is applied to the paper that is loaded in the POD Deck Lite-C and Multi-drawer Paper Deck-C.
IMPORTANT
This function is displayed only if the settings are made available by your local authorized Canon dealer. Even if this function is displayed, do not allow anyone to change the settings except for the system manager. For more information on changing the settings, contact your local authorized Canon dealer.

1.
Press (Settings/Registration).
2.
Press [Preferences] → [Paper Settings] → [Paper Type Management Settings].
3.
Select the paper type that you want to edit from the list → press [Details/Edit].
4.
Press [Change] for <Adj. Ppr Separation Fan Level>.
5.
Press [-] or [+] to set the fan level → [OK].
Details of each item are shown below:
[-5] to [-1]:
Select when high-density areas are not printed evenly, or when the amount of curl is at an unusually high level due to a lack of moisture, paper characteristics, and variable humid conditions.
[0]:
The default setting.
[1] to [5]:
Select when paper jams occur frequently, or when the temperature and humidity are high.
6.
Press [OK].
3U18-0HW