Setting a Department ID/User Name and PIN/Password Beforehand

3U18-1E3
You can save a department ID/user name and PIN/password in the Color Network ScanGear 2 Tool, so that the saved department ID/user name and PIN/password are automatically used for authentication when scanning.
1
Start Color Network ScanGear 2 Tool → select the scanner.
For details, see "Selecting the Scanner."
2
Check that [Dept. ID Management] or [User Authentication] are displayed in [User Management] → click [Settings].
3
Storing the department ID/user name and PIN/password.
For Dept. ID Management
Select [Save PIN] → enter [Department ID] and [PIN] → click [OK].
If a PIN is not registered in the device, leave [PIN] blank.
For User Authentication
Select [Save Password] → enter [User Name] and [Password] → click [OK].
4
Click [Exit] in the Color Network ScanGear 2 Tool.

NOTE
The window displayed may vary according to the operating system etc.
The descriptions and explanations herein are given using images from Color Network ScanGear 2.

Find manuals for other products
imagePRESS C910 / C810 / C710 / C710CA
User's Guide (Product Manual)
USRMA-3521-032021-08Copyright CANON INC. 2021