Setting a Department ID/User Name and PIN/Password Beforehand

52W7-1EC
You can save a department ID/user name and PIN/password in the Color Network ScanGear 2 Tool, so that the saved department ID/user name and PIN/password are automatically used for authentication when scanning.
1
Start Color Network ScanGear 2 Tool → select the scanner.
For details, see "Selecting the Scanner."
2
Check that [Dept. ID Management] or [User Authentication] are displayed in [User Management] → click [Settings].
3
Storing the department ID/user name and PIN/password.
For Dept. ID Management
Select [Save PIN] → enter [Department ID] and [PIN] → click [OK].
If a PIN is not registered in the device, leave [PIN] blank.
For User Authentication
Select [Save Password] → enter [User Name] and [Password] → click [OK].
4
Click [Exit] in the Color Network ScanGear 2 Tool.
NOTE
The window displayed may vary according to the operating system etc.
The descriptions and explanations herein are given using images from Color Network ScanGear 2.

Buscar manuals d’altres productes
imagePRESS C910 / C810 / C710
Guia de l'usuari
USRMA-4426-022021-08Copyright CANON INC. 2021