Set the rules for printing on another size of paper when paper of the same size as the received fax is not loaded. The printing method is determined based on these settings and the size of the loaded paper. Select [Off] for any printing methods that you do not want to use.
[Switch A]: If a smaller size of paper is loaded, the received fax is divided and printed.
[Switch B] and [Switch D]: If a larger size of paper is loaded, the received fax is printed at the same size as the original, with blank margins. For [Switch B] and [Switch D], the printed paper and margin layout are different.
[Switch B]
[Switch D]
[Switch C]: If a smaller size of paper is loaded, the received fax is reduced and printed.
* Depending on the size of the loaded paper, the received fax may not be printed even if a suitable print method is enabled.
* The received fax is printed on paper in a paper source that is set for automatic selection. Exclude any paper sources that you do not want to use from automatic selection. Using the Appropriate Paper Source for Each Function
Set whether to reduce the size of received faxes so that they fit on the paper when printed. To reduce the size, select [On], set the reduction ratio, and select whether to maintain the aspect ratio. When you select [Off], received faxes and I-Faxes that do not fit on the paper are divided and printed on separate pages.
In [Reduction Mode], select whether the reduction ratio is adjusted automatically or fixed. When you select [Auto], the size is reduced by a reduction ratio ranging from the specified value to 100%.
To maintain the aspect ratio, set [Reduction Direction] to [Vertical & Horizontal].
The operation of reducing the size of a two-page fax or I-Fax and arranging the pages on one side of a sheet of paper when printing is called "2 on 1." Set whether to perform "2 on 1" printing for received faxes and I-Faxes.
* Even when you select [On], the machine may not perform "2 on 1" printing due to conditions such as consecutive pages that are different sizes.
[On], [Off]
NOTE
When you enable this setting, a dashed line is printed at the center of the paper.
* If you print the sender information in the footer, the dashed line is not printed inside the area that includes the sender information. [Print RX Page Footer]
Set whether to add information such as the reception time and page numbers when printing. When you select [Print], information such as the reception time and page number is printed at the bottom of the page.
* When an e-mail without a message is received, the sender (From) e-mail address and subject are printed at the top of the first page of the attached file.
Set the gamma value for received I-Faxes. By setting the gamma value to match that of the sending side, you can reproduce images that are faithful to the original.
Set whether received faxes and I-Faxes are stored in a Confidential Fax Inbox or forwarded to another destination such as a file server. When you select [On], configure the forwarding conditions and forwarding destination in [Forwarding Settings]. [Forwarding Settings]
Set how the machine handles faxes and I-Faxes that fail to be forwarded. If Memory Lock is enabled when you select [Store/Print], the faxes and I-Faxes that fail to be forwarded will be stored. If Memory Lock is disabled, they will be printed. Setting Memory Lock
* This setting is enabled when [Delete Failed TX Jobs] is set to [On]. [Delete Failed TX Jobs]
Set the conditions for forwarding received faxes and I-Faxes. When no conditions are specified, the machine forwards all faxes and I-Faxes to the specified destination. Automatically Forwarding and Backing Up Received Faxes
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.
Settings/Registration] 
[Function Settings] 
Manual top
