[TCP/IP Settings]

Document number: A0YC-1XH
Configure the settings for using the machine on a TCP/IP network.
* Values in red text indicate the default setting for each item.
[IPv4 Settings]
[IPv6 Settings]
[DNS Settings]
[Computer Name/Workgroup Name Settings]
[SMB Server Settings]
[Specify SMB Server Version]
[SMB Client Settings]
[Specify SMB Client Version]
[WINS Settings]
[LPD Print Settings]
[RAW Print Settings]
[SNTP Settings]
[FTP Print Settings]
[Use UTF-8 to Display Name of FTP Print Job]
[WSD Settings]
[Use FTP PASV Mode]
[IPP Print Settings]
[Multicast Discovery Settings]
[Sleep Mode Notification Settings]
[Use HTTP]
[Use WebDAV Server]
[TLS Settings]
[Proxy Settings]
[Confirm Auth. Info. When in Auth. Management Mode]
[IPSec Settings]
[SIP Settings]
[TCP/IP Option Settings]
[Use Network Link Scan]
[IPv4 Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Configure the settings for using the machine in an IPv4 environment.
[IPv4 Settings]
[IPv6 Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Configure the settings for using the machine in an IPv6 environment.
[IPv6 Settings]
[DNS Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Configure the DNS settings when you use the machine in an environment with Domain Name System (DNS).
[DNS Settings]
[Computer Name/Workgroup Name Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Set the computer name used to identify the machine on the network, and the name of the workgroup to which the machine belongs. Setting the Computer Name and Workgroup Name
[Computer Name]: Canon****** ("******" represents the last six digits of the MAC address)
[Workgroup Name]: WORKGROUP
[Comment]
[Use NetBIOS]
[On], [Off]
IMPORTANT
When you set [Use NetBIOS] to [Off], [WINS Settings] is disabled. Make sure to set [Use NetBIOS] to [On] when you use WINS.
[SMB Server Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Configure the settings for using the machine as an SMB server. Preparations for Using Advanced Box
[Use SMB Server]
[On], [Off]
[Use SMB Authentication]
[On], [Off]
[Authentication Type]
[NTLMv1], [NTLMv2]
[Require SMB Signature for Connection]
[On], [Off]
[Require Encryption for Connection]
[On], [Off]
[Specify SMB Server Version]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Specify the SMB version to be used on the machine (SMB server).
The same version of SMB needs to be used for the SMB server and SMB client.
[1.0]
[On], [Off]
[2.0]
[On], [Off]
[3.0]
[On], [Off]
[3.1]
[On], [Off]
[SMB Client Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Configure the settings for using the machine as an SMB client and connecting to an SMB server (such as a computer with a shared folder). Configuring an SMB Client
[Authentication Type]
[NTLMv1], [NTLMv2]
[Require SMB Signature for Connection]
[On], [Off]
[Require Encryption for Connection]
[On], [Off]
[Timeout]
3 to 30 to 300 sec.
[Specify SMB Client Version]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Set the SMB version to use when you configure the machine as an SMB client and connect to an SMB server (such as a computer with a shared folder). Configuring an SMB Client
Specify the same version as that of the SMB server to be connected.
[1.0]
[On], [Off]
[2.0]
[On], [Off]
[3.0]
[On], [Off]
[3.1]
[On], [Off]
[WINS Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
When using the machine in a network environment that uses both NetBIOS and TCP/IP, configure Windows Internet Name Service (WINS) to convert the NetBIOS name to an IP address. Configuring WINS
[WINS Resolution]
[On], [Off]
[WINS Server Address]
IMPORTANT
This setting is disabled when [Use NetBIOS] is set to [Off] in [Computer Name/Workgroup Name Settings].
[LPD Print Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Set whether to use the LPD protocol. Using LPD, RAW, and WSD
When using the LPD protocol, you can also set the following:
Whether to output banner pages, when banner pages are configured for the print data
* Banner pages can be output only if the PCL Printer function or PS Printer function is installed.
Time from the start of reception standby, after print data reception is canceled, until the timeout
[On], [Off]
[LPD Banner Page]
[On], [Off]
[RX Timeout]
1 to 5 to 60 min.
[RAW Print Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Set whether to use the RAW protocol. Using LPD, RAW, and WSD
When using the RAW protocol, you can also set whether to use bidirectional communication, and the time from the start of reception standby, after print data reception is canceled, until the timeout.
[On], [Off]
[Bidirectional Communication]
[On], [Off]
[RX Timeout]
1 to 5 to 60 min.
[SNTP Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Configure the Simple Network Time Protocol (SNTP) settings to obtain time information from the time server on the network. Configuring SNTP
[Use SNTP]
[On], [Off]
[Polling Interval]
10 to 1440 to 2880 min.
[NTP Server Address]
[Check NTP Server]
[FTP Print Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Set whether to enable printing using the FTP protocol.
When you enable printing, also set the user name and password for the FTP server, as needed.
[Use FTP Printing]
[On], [Off]
[User Name]:guest
[Password]: 7654321
[Use UTF-8 to Display Name of FTP Print Job]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Set whether to use UTF-8 character encoding for displaying the file names when you print using the FTP protocol.
[On], [Off]
[WSD Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Set whether to use the WSD protocol. You can configure the setting for each function that uses the WSD protocol. Using LPD, RAW, and WSD
[Use WSD]
[On], [Off]
[Use WSD Browsing]
[On], [Off]
[Use WSD Scan]
[On], [Off]
NOTE
When you set [Use WSD] to [On], [Use WSD Browsing] and [Use HTTP] are also set to [On].
When you set [Use WSD Scan] to [On], [Use HTTP] is also set to [On].
[Use FTP PASV Mode]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Set whether to use FTP PASV mode. PASV mode needs to be configured when the machine is connected to an FTP server through a firewall. Configuring FTP PASV Mode
[On], [Off]
[IPP Print Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Set whether to use Internet Printing Protocol (IPP). Setting the IPP Printing Function of the Machine
When you use IPP printing, you can set whether to use IPPS printing (enable printing only when using TLS), and whether to use IPP authentication.
* Also use IPP when you print or send faxes with AirPrint. Setting the Functions and Security to Be Used with AirPrint
[On], [Off]
[Allow When Using TLS]
[On], [Off]
[Use Authentication]
[On], [Off]
NOTE
When you set this to [On], [Use HTTP] is also set to [On].
[Multicast Discovery Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Set whether to respond to multicast discovery used by device management software or other applications. Configuring SLP Communication
When you set the machine to respond to multicast discovery, also set the name of the scope to which the machine belongs.
* When you use the machine in an environment in which software that performs communication using a Service Location Protocol (SLP) is installed, also configure [Sleep Mode Notification Settings] using Remote UI. Configuring SLP Communication
[Response]
[On], [Off]
[Scope Name]
[Sleep Mode Notification Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Configure the Service Location Protocol (SLP) communication settings when software that performs communication using an SLP is installed. Configuring SLP Communication
* [Sleep Mode Notification Settings] can only be configured using Remote UI.
[Notify]
On, Off
[Port Number]
1 to 11427 to 65535
[Number of Routers to Traverse]
0 to 3 to 254
[Notification Interval]
60 to 600 to 65535 sec.
[Use HTTP]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Set whether to use HTTP. Disabling HTTP Communication
[On], [Off]
NOTE
When you set this to [Off], the following settings are also set to [Off]:
[Remote UI]
[IPP Print Settings]
[Use WSD] and [Use WSD Scan] in [WSD Settings]
[Use WebDAV Server]
[Use WebDAV Server]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Set whether to use the machine as a WebDAV server. Preparations for Using Advanced Box
[On], [Off]
NOTE
When you select [On], [Use HTTP] is also set to [On].
[TLS Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Set the key pair, TLS version, and encryption algorithm to use for TLS encrypted communication. Using TLS
[Key and Certificate]
[Set as Default Key]
[Certificate Details]
[Version]
[Serial Number]
[Signature Algorithm]
[Issued To]
[Validity Start Date]
[Validity End Date]
[Issuer]
[Public Key]
[Certificate Thumbprint]
[Issued To (Altn. Name)]
[Verify Certificate]
[Display Use Location]
[Specify Allowed Versions]
[Maximum Version]
[TLS 1.0], [TLS 1.1], [TLS 1.2], [TLS 1.3]
[Minimum Version]
[TLS 1.0], [TLS 1.1], [TLS 1.2], [TLS 1.3]
[Encryption Algorithm Settings]
[AES-CBC (256-bit)]
[On], [Off]
[AES-GCM (256-bit)]
[On], [Off]
[3DES-CBC]
[On], [Off]
[AES-CBC (128-bit)]
[On], [Off]
[AES-GCM (128-bit)]
[On], [Off]
[CHACHA20- POLY1305]
[On], [Off]
[Key Exchange Algorithm Settings]
[RSA]
[On], [Off]
[ECDHE]
[On], [Off]
[X25519]
[On], [Off]
[Signature Algorithm Settings]
[RSA]
[On], [Off]
[ECDSA]
[On], [Off]
[HMAC Algorithm Settings]
[SHA1]
[On], [Off]
[SHA256]
[On], [Off]
[SHA384]
[On], [Off]
[Proxy Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Set whether to use a proxy server to connect the machine to the network. Using a Proxy
When you use a proxy server, set the proxy server information, applicable range, and authentication information.
[Use Proxy]
[On], [Off]
[Server Address]
[Port Number]
1 to 80 to 65535
[Use Proxy within Same Domain]
[On], [Off]
[Set Authentication]
[Use Proxy Authentication]
[On], [Off]
[User Name]
[Password]
[Confirm Auth. Info. When in Auth. Management Mode]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Set whether the machine checks authentication information when you print using the V4 printer driver.
* This setting is applied when you use TLS encrypted communication.
[On], [Off]
NOTE
This setting is not applied if there is no key to use for TLS encrypted communication or if the key is corrupted. Using TLS
[IPSec Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Configure the IP Security Protocol (IPSec) settings. Using IPSec
[Use IPSec]
[On], [Off]
[Receive Non-Policy Packets]
[Allow], [Reject]
[Policy On/Off]
[Register]
[Policy Name]
[Selector Settings]
[Local Address]
[Remote Address]
[Port]
[IKE Settings]
[IKE Mode]
[Validity]
[Authentication Method]
[Authentication/Encryption Algorithm]
[IPSec Network Settings]
[Validity]
[PFS]
[Authentication/Encryption Algorithm]
[Connection Mode]
[Only Allow 256-bit for AES Key Length]
[Edit]
[Delete]
[Print List]
[SIP Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Configure the SIP settings.
For details, see the IP FAX Expansion Kit manual at the online manual site.
https://oip.manual.canon/
[TCP/IP Option Settings]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Set the TCP option window scale, MTU size, and minimum value of MSS.
* [TCP/IP Option Settings] can only be configured using Remote UI.
[Use Window Scale Option]
[On], [Off]
[MTU Size]
600 to 1500 bytes
[Minimum Value of MSS]
48 to 560 bytes
[Use Network Link Scan]
[ Settings/Registration] [Preferences] [Network] [TCP/IP Settings]
Set whether to use Network Link Scan. Use Network Link Scan when you perform scanning with functions such as AirPrint. Setting the Functions and Security to Be Used with AirPrint
When using Network Link Scan, you can also set whether to encrypt communication with TLS.
[On], [Off]
[Use TLS]
[On], [Off]

Find manuals for other products
imageFORCE C7165
User's Guide
USRMA-9064-012025-02Copyright CANON INC. 2025